Watering of the Wiper Roller Process
Follow the below steps to run the process
Tools
- Syringe
- DI Water
Watering Process
- Applying DI Water across Wiper Roller
Step 1: Select REMOVE under WIPER ROLLER from the Maintenance Menu
Step 2: Open the clamshell
Step 3: Apply 2mL of DI Water across the Wiper Roller
Step 4: Manually rotate the wiper roller to the oppossite side
Step 5: Apply another 2mL of DI Water across the Wiper Roller
Step 6: Close the Clamshell
Step 7: Select INSTALL under WIPER ROLLER on the Maintenance menu
Step 8: After the wiper installation completes, Run test prints
If issue is still not resolved